AIM7 TEMPEST XD Linear Muzzle Compensators
$54.95
Features of the AIM7 Linear Comp
- Thread Types: Available in multiple thread patterns including 1/2×28 TPI, 5/8×24 TPI, 1/2×36 TPI, 18×1, 5/8×32 TPI, and .578×28 TPI, 9/16×24 TPI.
- Overall Length: 2.75 inches
- Outer Diameter: 1.38 inches
- Caliber: Varies based on barrel thread
- Weight: 2.9 oz
- 6061 Aluminum
- Surface Finish: Black anodized
AIM7 Integral Brake Direct Thread Mount 1/2 x28″ .223/556/9mm/22LR
$79.00
Material: 17-4 H900 stainless steel — known for high strength and corrosion resistance.
Dual Threading:
Internal Thread: 1/2-28 (standard for many .223/5.56 barrels).
External Thread: 1.125×28 — compatible with certain suppressors or accessories.
Length: 1.49” overall, with a 0.721” tail — gives room for pin-and-weld compliance or clearing tight handguards.
Exit Aperture: Sized for .45 caliber projectiles — compatible with a wide range of calibers, offering good versatility.
Design: Integral brake — not just a thread adapter, but also adds muzzle brake functionality.
AIM7 Lower Parts Kit Fits GLOCK 17 Gen 1-3
$139.00
- Slide Stop Release with Spring
- Locking Block Pin
- Magazine Release
- Magazine Release Spring
- Slide Lock
- Slide Lock Spring
- Trigger Housing Pin
- Trigger Housing with 336 Ejector
- Trigger Pin
- Trigger Spring
- Trigger with Trigger Bar
- Trigger with Trigger Bar and Trigger Housing are bagged individually and they need to be assembled by users.
AIM7 APEX 2.0 Modular Comp With AlphaCone 556/308/9mm/45ACP/30CAL
$79.00 – $99.00
- CNC Machined from High-Quality 6061-T651 Aluminum
- Solid One-Piece Machined Construction
- Black Hard Coat Anodized Finish for Enhanced Durability
- 1/2″ × 28 TPI Thread Pitch (Barrel Adapter)
- Tube Threading: 1-1/8″ × 28 TPI (ID/OD)
- Modular, User-Configurable Design
- AlphaCone Front Cap for improved gas flow and recoil management
- Rear Thread Adapter for increased compatibility with a wide range of barrels
- Tip: Use Loctite for a secure, vibration-resistant installation
- 416R Stainless Steel Barrel
- 1:16 Twist
- 9 MM Caliber
- Threaded
- Unbranded
Our barrels for Glock 17s are compatible with Glock Gen 1-4 pistols (not Gen-5).
- 416R Stainless Steel Barrel
- 1:16 Twist
- 9 MM Caliber
- Threaded
- Unbranded
Our barrels for Glock 17s are compatible with Glock Gen 1-4 pistols (not Gen-5).
- 416R Stainless Steel Barrel
- 1:16 Twist
- 9 MM Caliber
- Full Length
- Threaded
- Unbranded
Our barrels for Glock are compatible with Glock Gen 1-4 pistols (not Gen-5).
Material: 6061-T651 AL Coating: Black Hard Coat Anodized Bore:0.50" Small holes: 0.17" Open Outside Diameter: 1.24″ ID/OD Thread: 1-1/8 x 28 TPI Total Thickness: 0.55″ Total Thread pitch Length: 0.19″ Weight: 0.6 oz
Length: 1.10" Thread Pitch: 1.375x24 (1 3/8x24) Inner Diameter: 1.25" Outer Diameter threaded: 1.36" Outer Diameter Tool Notches: 1.60"
- 4150 Black Nitride Barrel
- 1:16 Twist
- 9 MM Caliber
- Full Length
- Threaded
- Unbranded
Our barrels for Glock are compatible with Glock Gen 1-4 pistols (not Gen-5).
- 4150 Black Nitride Barrel
- 1:16 Twist
- 9 MM Caliber
- Full Length
- Threaded
- Unbranded
Our barrels for Glock are compatible with Glock Gen 1-4 pistols (not Gen-5).
Diameter: 1.5″Overall length: .65″Weight: 1.1 OuncesMale Threads: 1.375-24Female Threads: 1/2x28 & 5/8x24Material: 6160 Anodized Black Aluminum / 17-4 Steel
Specifications
- Total Length: 6.15"
- Total Weight: 4.7 oz
- Tube Inside Diameter: 1.06"
- Tube Outer Diameter: 1.28"
- Tube inner Thread pitch: 1.125 x 28 (1-1/8" x 28)
- CNC Machined from High-Quality 6061-T651 Aluminum
- Solid One-Piece Machined Construction
- Black Hard Coat Anodized Finish for Enhanced Durability
- 1/2" × 28 TPI Thread Pitch (Barrel Adapter)
- Tube Threading: 1-1/8" × 28 TPI (ID/OD)
- Modular, User-Configurable Design
- AlphaCone Front Cap for improved gas flow and recoil management
- Rear Thread Adapter for increased compatibility with a wide range of barrels
- Tip: Use Loctite for a secure, vibration-resistant installation
- CNC Machined from High-Quality 6061-T651 Aluminum
- Solid One-Piece Machined Construction
- Black Hard Coat Anodized Finish for Enhanced Durability
- 1/2" × 28 TPI Thread Pitch (Barrel Adapter)
- Tube Threading: 1-1/8" × 28 TPI (ID/OD)
- Modular, User-Configurable Design
- AlphaCone Front Cap for improved gas flow and recoil management
- Rear Thread Adapter for increased compatibility with a wide range of barrels
- Tip: Use Loctite for a secure, vibration-resistant installation
Specifications
- Total Length: 6.15"
- Total Weight: 4.7 oz
- Tube Inside Diameter: 1.06"
- Tube Outer Diameter: 1.28"
- Tube inner Thread pitch: 1.125 x 28 (1-1/8" x 28)
Specifications
- Total Length: 6.15"
- Total Weight: 4.7 oz
- Tube Inside Diameter: 1.06"
- Tube Outer Diameter: 1.28"
- Tube inner Thread pitch: 1.125 x 28 (1-1/8" x 28)
Specifications
- Total Length: 6.15"
- Total Weight: 4.7 oz
- Tube Inside Diameter: 1.06"
- Tube Outer Diameter: 1.28"
- Tube inner Thread pitch: 1.125 x 28 (1-1/8" x 28)
-
Specifications
- Total Length: 6.15"
- Total Weight: 4.7 oz
- Tube Inside Diameter: 1.06"
- Tube Outer Diameter: 1.28"
- Tube inner Thread pitch: 1.125 x 28 (1-1/8" x 28)
Specifications
- Total Length: 6.15"
- Total Weight: 4.7 oz
- Tube Inside Diameter: 1.06"
- Tube Outer Diameter: 1.28"
- Tube inner Thread pitch: 1.125 x 28 (1-1/8" x 28)
– 1 x HK REAR BRACE/STOCK AR/MCX STOCK ADAPTER Picatinny (2 pcs) – 2 x Screws for HK REAR BRACE/STOCK AR/MCX STOCK ADAPTER Picatinny
100% American-made components, manufactured to our exacting standards.
- CNC Machined from High-Quality 6061-T651 Aluminum
- Solid One-Piece Machined Construction
- Black Hard Coat Anodized Finish for Enhanced Durability
- 1/2" × 28 TPI Thread Pitch (Barrel Adapter)
- Tube Threading: 1-1/8" × 28 TPI (ID/OD)
- Modular, User-Configurable Design
- Rear Thread Adapter for increased compatibility with a wide range of barrels
- Tip: Use Loctite for a secure, vibration-resistant installation
